The investigation on sialic acid-modified pectin nanoparticles loaded with oxymatrine for orally targeting and inhibiting the of ulcerative colitis.

The aim of the study was to develop an oral targeting drug delivery system (OTDDS) of oxymatrine (OMT) to effectively treat ulcerative colitis (UC). The OTDDS of OMT (OMT/SA-NPs) was constructed with OMT, pectin, Ca2+, chitosan (CS) and sialic acid (SA). The obtained particles were characterized in terms of particle size, zeta potential, morphology, drug loading, encapsulation efficiency, drug release and stability. The average size of OMT/SA-NPs was 255.0 nm with a zeta potential of -12.4 mV. The loading content and encapsulation efficiency of OMT/SA-NPs were 14.65% and 84.83%, respectively. The particle size of OMT/SA-NPs changed slightly in the gastrointestinal tract. The nanoparticles can delivery most of the drug to the colon region. In vitro cell experiments showed that the SA-NPs had excellent biocompatibility and anti-inflammation, and the uptake of SA-NPs by RAW 264.7 cells was time and concentration-dependent. The conjugated SA can help the internalization of NPs into target cells. In vivo experiments showed that OMT/SA-NPs had a superior anti-inflammation effect and the effect of reducing UC, which was attributed to the delivery most of OMT to the colonic lumen, the specific targeting and retention in colitis site and the combined anti-inflammation of OMT and NPs.

Preparation and evaluation of sustained release pirfenidone-loaded microsphere dry powder inhalation for treatment of idiopathic pulmonary fibrosis.

Pirfenidone (PFND) is a recommended oral drug used to treat idiopathic pulmonary fibrosis, but have low bioavailability and high hepatotoxicity. The study, therefore, seeks to improve the therapeutic activities of the drug via increased bioavailability and reduced associated side effects by developing a novel drug delivery system. The electrostatic spray technology was used to prepare a sustained release pirfenidone-loaded microsphere dry powder inhalation with PEG-modified chitosan (PFND-mPEG-CS-MS). The entrapment efficiency, drug loading, and in vitro cumulative drug release rate (at 24 h and with a sustained release effect) of PFND-mPEG-CS-MS were 77.35±3.01%, 11.45±0.64%, and 90.4%, respectively. The Carr's index of PFND-mPEG-CS-MS powder was 17.074±2.163% with a theoretical mass median aerodynamic diameter (MMADt) of 0.99±0.07 µm, and a moisture absorption weight gain rate (Rw) of 4.61±0.72%. The emptying rate, pulmonary deposition rate (fine particle fraction) and actual mass median aerodynamic diameter (MMADa) were 90%∼95%, 48.72±7.04% and 3.10±0.16 µm, respectively. MTT bioassay showed that mPEG-CS-MS (200 µg/mL) had good biocompatibility (RGR = 90.25%) and PFND-mPEG-CS-MS (200 µg/mL) had significant inhibitory activity (RGR = 49.82%) on fibroblast growth. The pharmacokinetic data revealed that the t1/2 (5.02 h) and MRT (10.66 h) of PFND-mPEG-CS-MS were prolonged compared with the free PFND (t1/2, 1.67 h; MRT, 2.71 h). The pharmacodynamic results also showed that the formulated-drug group had slight pathological changes, lower lung hydroxyproline content, and reduced hepatotoxicity compared with the free-drug group. The PFND-mPEG-CS-MS further significantly down-regulated TGF-ß cytokines, Collagen I, and α-SMA protein expression levels compared with the free drug. The findings indicated that the PFND-mPEG-CS-MS had a good sustained release effect, enhanced bioavailability, decreased toxicity, and increased anti-fibrotic activities.

Fabrication of ticagrelor bioadhesive solid dispersion based on coaxial electrostatic spray to improve drug release and enhance oral bioavailability.

Due to the low solubility and poor bioavailability of Ticagrelor (TIC), the current study developed a structured bioadhesive core-shell drug delivery system to address it. Ticagreior solid dispersion (T-SD) was fabricated using the uniaxial electrostatic spray method. Ticagrelor bio adhesive solid dispersion (T-BSD) was also prepared using the coaxial electrostatic spray technique. The adhesion of T-BSD to each intestinal segment was determined using biological adhesion test. The compartment model was used to study the plasma concentration-time curve and related pharmacokinetic parameters. The results of bioadhesion tests showed a positive adhesion effect of T-BSD in each intestinal segment. The maximum plasma concentration (Cmax) of T-BSD was increased to 777.08ng/mL compared with the free drug (367ng/mL). Similarly, t1/2, MRT and Tmax of T-BSD (12.1h, 9.4h, 4h) were higher than the free drug (11.2h, 8.6h, 1h), respectively. The relative bioavailability of T-BSD was further increased to 430% compared with the free drug. The findings collectively revealed that the coaxial-electrospray technique could be a promising way to improve the bioavailability of TIC.

Novel silk protein/hyaluronic acid hydrogel loaded with azithromycin as an immunomodulatory barrier to prevent postoperative adhesions.

Peritoneal adhesions, a common postoperative complication of laparotomy, are still treated with physical barriers, but their efficacy and ease of use are controversial. In this paper, we developed a wound microenvironment-responsive hydrogel composed of Antheraea pernyi silk protein (ASF) from wild cocoons and tyramine-modified hyaluronic acid (HA-Ph) loaded with azithromycin (AZI), glucose oxidase (GOX), and horseradish peroxidase (HRP). In addition, GOX-catalyzed oxygen production enhanced the antibacterial ability of the hydrogel. Moreover, the drug-loaded hydrogel increased macrophage CD206 expression while decreasing IL-6 and TNF-α expression. More importantly, the retarding effect of this novel hydrogel system on AZI almost eliminated the appearance of postoperative adhesions in rats. It was also found that the novel hydrogel enhanced the modulation of the TLR-4/Myd88/NF-κB pathway and TGF-ß/Smad2/3 pathway by azithromycin in the locally damaged peritoneum of rats, which accelerated the remodeling of damaged tissues and dramatically reduced the deposition of collagen. Therefore, spraying the novel drug-loaded hydrogel on postoperative abdominal wounds can effectively inhibit the formation of postoperative adhesions.

Construction and Evaluation of Traceable rhES-QDs-M-MS Protein Delivery System: Sustained-Release Properties, Targeted Effect, and Antitumor Activity.

Recombinant human endostatin (rhES) is a protein drug with poor stability and short in vivo circulation time. The present study was therefore aimed at developing sustained-release lung targeted microspheres drug delivery system and evaluating its targeting efficiency using in vivo imaging techniques with quantum dots (QDs) as the imaging material. The oil-soluble QDs were coated with amphiphilic polymers to obtain a polymer-quantum dots micelle (QDs-M) with the potential to stably disperse in water. The rhES and QDs-M were combined using covalent bonds. The rhES-QDs-M microspheres (rhES-QDs-M-MS) were prepared using electrostatic spray technology and also evaluated via in vivo imaging techniques. The pharmacodynamics was further studied in mice. The rhES-QDs-M-MS (4-8 µm) were stable in an aqueous medium with good optical properties. The in vitro studies showed that the rhES-QDs-M-MS had sustained release which was maintained for at least 15 days (cumulative release >80%) without any burst release. The rhES-QDs-M-MS had a very high safety profile and also effectively inhibited the in vitro proliferation of human umbilical vein endothelial cells by about 70%. The pharmacokinetic results showed that the rhES could still be detected at 72 h in the experimental group which meant that the rhES-QDs-M-MS had a significant sustained-release effect. The rhES-QDs-M-MS had a better lung targeting effect and higher antitumor activity compared with the rhES. The traceable rhES-QDs-M-MS served as a promising drug delivery system for the poorly stable rhES proteins and significantly increased its lung-targeted effect, sustained-release properties, and antitumor activities.

Preparation and Evaluation of rhINF-α-2b Sodium Hyaluronate Cross-Linked Porous Microspheres: Characterization, Sustained-Release Properties, and Antitumor Activity.

Recombinant human interferon α-2b (rhINF-α-2b), like most proteins, has several shortcomings such as relatively short half-life, low therapeutic index, high circulating drug fluctuations, and rapid degradation which could hinder its effective delivery. Novel electrostatic spray and ion exchange drug-loading techniques were combined to formulate rhINF-α-2b sodium hyaluronate cross-linked porous sustained-release microspheres (rhINF-α-2b-SHCPM), a protein delivery system. The different properties of rhINF-α-2b-SHCPM including the physicochemical nature, in vitro release behavior, and antitumor activity were evaluated. The loading rate (10.31 ± 0.94%) and encapsulation efficiency (89.09 ± 2.37%) of rhINF-α-2b-SHCPM produced acceptable values. The in vitro cumulative release rate of rhINF-α-2b-SHCPM within 24 h was also 86.26 ± 2.11% with a much better sustained release effect. Thus, the half-life (10.763 h) and retention time (14.067 h) of rhIFNα-2b-SHCPM were significantly prolonged with enhanced bioavailability (43,198.387 ng/L*h) and decreased peak concentration (15,266.4 ngL-1) compared with the free rhIFNα-2b protein (0.912 h, 0.952 h, 34,749.048 ng/L*h, and 48,870.2 ngL-1, respectively). The in vitro anti-proliferative activity and in vivo tumor inhibitory rate of rhIFNα-2b-SHCPM also increased by 90 and 55.86%, respectively, compared with the free rhIFNα-2b solution. The findings significantly supported a well-developed protein delivery system with improved sustained release, acceptable bioavailability, and increased antitumor activities. Graphical Abstract.

A versatile gas-generator promoting drug release and oxygen replenishment for amplifying photodynamic-chemotherapy synergetic anti-tumor effects.

Excellent efficiency of combinational therapy of chemotherapy and photodynamic therapy (PDT) highly depends on the amounts of drug and oxygen in tumor tissue. However, how to cleverly promote drug release accompanied with improving oxygen concentration remains a challenge. Herein, we proposed a gas-generator that realized a high drug loading and integrated facilitation of drug release with oxygen replenishment into a single and simple system, utilizing huge cavities and mesoporous channels of hollow mesoporous silica nanoparticles (HMSNs) for encapsulating oxygen (O2) saturated perfluoropentane (PFP) droplets, indocyanine green (ICG) and doxorubicin (DOX), biocompatible polydopamine (PDA) as the gatekeepers. Under irradiation of 808 nm laser, the thermal effect of PDA caused PFP droplets occur liquid-gas phase transition that triggered the burst release of DOX and O2, finally amplifying the synergetic effects of PDT and chemotherapy both in vitro and in vivo. The influence of PFP, GSH and laser on drug release kinetic was explored through mathematical models. Notably, the mechanism of gas-generator on accelerating drug release under irradiation based on doing volume work and enhancing diffusion coefficient was clarified by researching the relation between DOX release, PFP release and temperature change. Additionally, the way of replenishing O2 did not rely on intracellular components but timely offered abundant "fuels" for producing reactive oxygen species (ROS) when compared with traditional manners. This work provides a new research strategy for boosting drug release and opens an avenue for constructing multifunctional controlled delivery systems.

Multi-stimuli responsive mesoporous silica-coated carbon nanoparticles for chemo-photothermal therapy of tumor.

In this work, a traceable dual-porous mesoporous silica-coated mesoporous carbon nanocomposite (MCN@Si) with high drug loading capacity and high photothermal conversion efficiency (30.5 %) was successfully prepared. Based on the nanocomposite, a pH/redox/near infrared (NIR) multi-stimuli responsive drug delivery system was constructed to realize the accurate drug delivery, drug controlled release and chemo-photothermal synergistic antitumor therapy. MCN@Si was used as a vehicle to load doxorubicin (DOX) with a high drug loading efficacy of 48.2 % and a NIR absorbance agent for photothermal therapy and NIR thermal imaging. Carbon dots (CDs) with proper size were covalently attached to the surface of MCN@Si via disulfide bonds to block the mesopores, preventing DOX premature release from DOX/MCN@Si-CDs. Besides, CDs were served as fluorescent probe to prove the visualization potential of the drug delivery system. DOX was rapidly released at the condition of low pH and high GSH concentration due to the breakage of disulfide bonds and protonation of DOX. Moreover, the local hyperthermia generated by MCN@Si-CDs under NIR irradiation could not only directly kill cells, but also accelerate DOX release and enhance cells sensitivity and permeability. Two-dimensional cells and three-dimensional tumor spheroids assays illustrated that DOX/MCN@Si-CDs + NIR group exhibited a superior thermochemotherapy synergistic treatment effect and the combination index (CI) was 0.378. Biodistribution study showed the biosecurity of preparations and its prolonged detention time in tumor sites. Besides, antitumor experiment in vivo also performed the excellent synergistic inhibition effect. All the results demonstrated that DOX/MCN@Si-CDs is a traceable multi-stimuli responsive nanodelivery system and can achieve efficient chemo-photothermal synergistic antitumor therapy.

Polymer-functionalized mesoporous carbon nanoparticles on overcoming multiple barriers and improving oral bioavailability of Probucol.

Oral administration of nanoparticles is extremely limited due to the two processes of mucus permeation and epithelial absorption, which requires completely opposite surface properties of the nanocarriers. To tackle the contradiction, we developed a rational strategy to modify the surface of mesoporous carbon nanoparticles with chitosan concealed by a hydrophilic N-(2-hydroxypropyl) methacrylamide copolymer (pHPMA) layer. Probucol (PB) with the low poor permeability and solubility was loaded in optimal nanocarriers to realize the high loading efficacy and controlled release. The pHPMA polymer is a hydrophilic "mucus-inert" material, which could be dissociable from the surface of nanoparticles in the mucus, thus promoting their mucus permeation and causing exposure of chitosan in transepithelial transport. The swelling effect of chitosan under acidic conditions allowed regulation of PB release behavior. In conclusion, the mucus-permeable nanocarrier could effectively overcome multiple gastrointestinal absorption barriers and the oral bioavailability of PB-loaded HCMCN was 2.76-fold that of commercial preparation.

Mesoporous carbon­manganese nanocomposite for multiple imaging guided oxygen-elevated synergetic therapy.

Despite of the extensive application of photodynamic therapy (PDT)nowadays, several restrictions have emerged such as hydrophobility, undesired phototoxicity and low selectivity of photosensitizer as well as the hypoxic tumor microenvironment. To address these challenges, a multifunctional mesoporous carbon­manganese nanocomposite (MC-MnO2) is developed to load Chlorin e6 (Ce6) with a high loading capacity. The MC-MnO2 can prevent Ce6 from being activated by the sunlight to reduce unintentional phototoxicity significantly and realize the hypoxia relief via reacting with the H2O2 overexpressed in tumor tissue, meanwhile, the reduced product Mn2+ ion could act as a T1/T2-weighted MRI contrast. Based on the broad absorption of MC-MnO2 within the range of NIR, the nanoparticle has the potential for serving as a photothermal agent and photoacoustic imaging (PAI) agent. The PEG and iRGD are further decorated on MC-MnO2 (iPMC-MnO2) to improve the biocompatibility, targeting and penetration of the nanoparticle. Taking full advantage of the good photothermal effect of iPMC-MnO2, the photothermal therapy (PTT) and enhanced PDT are subtly integrated into one system, developing an intelligent multimodal diagnostic and therapeutic nanoplatform and realizing our "one nanoparticle fits all" dream.

Polydopamine-coated mesoporous silica nanoparticles for multi-responsive drug delivery and combined chemo-photothermal therapy.

Synergistic therapy of chemotherapy and photothermal therapy exhibits great potential to improve the therapeutic efficiency for cancer therapy. In this study, a new biocompatible multiple sensitive drug delivery system (DDS) was synthesized by covering a polydopamine (PDA) layer on doxorubicin (DOX)-loaded mesoporous silica nanoparticle (MSN) via disulfide bonds (MSN-SS-PDA/DOX). PDA worked as a photothermal therapy (PTT) agent and also a gate keeper to control drug release, which was highly sensitive to pH and could prolong the residence time, simultaneously increase water solubility and biocompatibility of the nanoparticles. The DDS exhibited excellent monodispersity, redox/pH/NIR-multi-dependent release characteristics, remarkable photothermal conversion property (photothermal conversion efficiency η = 40.21%) and outstanding tumor cell synergistic killing efficiency of chemotherapy and photothermal therapy (combination index CI = 0.175). The biodistribution and pharmacodynamics experiments of MSN-SS-PDA/DOX in 4T1 tumor models indicated that MSN-SS-PDA made more DOX accumulate in tumor tissue than free DOX, extend circulation time of DOX in the body, and exhibit a significant synergistic antitumor efficacy. Meanwhile, the tumor growth was remarkably inhibited, which was much more obvious than any monotherapy effect. Thus, the novel nanoplatform presents a promising future as a drug delivery system for combination therapy.

Preliminary Studies on Liquiritin, Deoxyschizandrin, and Tanshinone II A as Potential Anti-Neurodegenerative Disease Agent: Determination by Reverse-Phase Liquid Chromatography in Tianwang Buxin Pills.

Tianwang Buxin pill (TWBXP) is an ancient Chinese classic prescription. Liquiritin, deoxyschizandrin, and tanshinone II A are three bioactive components in TWBXP, which have been proven to be closely related to the therapy effect of neurodegenerative disease. Their contents are very low in TWBXP. In this study, we used a diode array detector (DAD) to perform a full wavelength scanning in order to choose a most suitable detection wavelength to establish an HPLC method for the simultaneous determination of these three components in TWBXP. Various chromatographic conditions were investigated to verify its applicability. Finally, a Kromasil C18 column (250 × 4.6 mm, 5 µm) thermostated at 30°C, mobile phase as 0.2% phosphoric acid solution (eluent A), and 0.1% phosphoric acid-acetonitrile solution (eluent B) were used. Both external standard method and internal standard method were used for quantification. The results showed that both methods were simple and convenient in operation without special pretreatment and exhibits excellent precision, repeatability (RSD < 3.0%), good linearity (R 2 > 0.9990), and good recoveries (recovery value between 95% and 105%). Because of the low contents in samples, the internal standard method provided a better accurate result than the external standard method. The stability results showed the sample became stable within 24 hours at room temperature. The method provides a convenient and effective way for the quality control of TWBXP, and it can help the research about AD in the future.

A Delivery System for Oral Administration of Proteins/Peptides Through Bile Acid Transport Channels.

Proteins and peptides are poorly absorbed via oral administration because of the gastrointestinal tract environment and lysosomal digestion after apical endocytosis. A delivery system, consisting of a deoxycholic acid-conjugated nanometer-sized carrier, may enhance the absorption of proteins in the intestine via the bile acid pathway. Deoxycholic acid is first conjugated to chitosan. Liposomes are then prepared and loaded with the model drug insulin. Finally, the conjugates are bound to the liposome surface to form deoxycholic acid and chitosan conjugate-modified liposomes (DC-LIPs). This study demonstrates that DC-LIPs can promote the intestinal absorption of insulin via the apical sodium-dependent bile acid transporter, based on observing fluorescently stained tissue slices of the rat small intestine and a Caco-2 cell uptake experiment. Images of intestinal slices revealed that excellent absorption of DC-LIPs is achieved via apical sodium-dependent bile acid transporter, and a flow cytometry experiment proved that DC-LIPs are a highly efficient delivery carrier. Caco-2 cells were also used to study the lysosome escape ability of DC-LIPs. We learned from confocal microscopy photographs that DC-LIPs can protect their contents from being destroyed by the lysosome. Finally, according to pharmacokinetic analyses, insulin-loaded DC-LIPs show a significant hypoglycemic effect with an oral bioavailability of 16.1% in rats with type I diabetes.

Report: Preparation of levodopa/carbidopa compound drug resins.

The main objective of this study was to prepare the levodopa/carbidopa compound drug resins and investigate affecting factors such as drug concentration, temperature, particle size. The drug resins were made by bath method and the effects of above factors during the process of preparation was studied. Studies on the stabilities of drugs and drug resins were carried out by HPLC. The Results showed that the preparation of drug resins was influenced by drug concentration, resin particle size, reaction temperature and solvent concentration. In certain conditions the degradation peaks were found in the chromatograms of levodopa and carbidopa while the drug-resins remained undegraded. The study indicates that the drug resin technology is an effective way of improving stability of the drug and possesses certain sustained-release effects.

Synthesis, Crystal Structure, Absolute Configuration and Antitumor Activity of the Enantiomers of 5-Bromo-2-chloro-N-(1-phenylethyl)pyridine-3-sulfonamide.

Pyridinesulfonamide is an important fragment which has a wide range of applications in novel drugs. R- and S-isomers of 5-bromo-2-chloro-N-(1-phenylethyl)pyridine-3-sulfonamide have been synthesized, and the stereostructures have been researched. Single crystals of both compounds were obtained for X-ray analysis, and the absolute configurations (ACs) have been further confirmed by electronic circular dichroism (ECD), optical rotation (OR) and quantum chemical calculations. The crystal structures and calculated geometries were extremely similar, which permitted a comparison of the relative reliabilities of ACs obtained by ECD analyses and theoretical simulation. In addition, the effect of stereochemistry on the PI3Kα kinase and anticancer activity were investigated. Compounds 10a and 10b inhibit the activity of PI3Kα kinase with IC50 values of 1.08 and 2.69 µM, respectively. Furthermore, molecular docking was performed to analyze the binding modes of R- and S-isomers.

Dual-stimuli responsive hyaluronic acid-conjugated mesoporous silica for targeted delivery to CD44-overexpressing cancer cells.

In this paper, a redox and enzyme dual-stimuli responsive delivery system (MSN-SS-HA) based on mesoporous silica nanoparticles (MSN) for targeted drug delivery has been developed, in which hyaluronic acid (HA) was conjugated on the surface of silica by cleavable disulfide (SS) bonds. HA possesses many attractive features, including acting as a targeting ligand and simultaneously a capping agent to achieve targeted and controlled drug release, prolonging the blood circulation time, and increasing the physiological stability and biocompatibility of MSN. The anticancer drug doxorubicin (DOX) was chosen as a model drug. In vitro drug release profiles showed that the release of DOX was markedly restricted in pH 7.4 and pH 5.0 phosphate buffer solution (PBS), while it was significantly accelerated upon the addition of glutathione (GSH)/hyaluronidases (HAase). In addition, the release was further accelerated in the presence of both GSH and HAase. Confocal laser scanning microscopy (CLSM) and fluorescence-activated cell sorting (FACS) showed that MSN-SS-HA exhibited a higher cellular uptake via cluster of differentiation antigen-44 (CD44) receptor-mediated endocytosis compared with thiol (SH)-functionalized MSN (MSN-SH) in CD44 receptor over-expressed in human HCT-116 cells. The DOX-loaded MSN-SS-HA was more cytotoxic against HCT-116 cells than NIH-3T3 (CD44 receptor-negative) cells due to the enhanced cellular uptake of MSN-SS-HA. This paper describes the development of an effective method for using a single substance as multi-functional material for MSN to simultaneously regulate drug release and achieve targeted delivery.

Folate-polyethyleneimine functionalized mesoporous carbon nanoparticles for enhancing oral bioavailability of paclitaxel.

Polymer-functionalized carbon nanoparticles hold great promise for their use in enhancing the oral absorption of drugs with poor oral bioavailability. And since the abundant expression of folate receptors in intestinal tract, folic acid (FA) modified uniform mesoporous carbon spheres (UMCS) was used to improve oral absorption of paclitaxel, a chemotherapeutic drug with poor oral bioavailability. In this research, folate-polyethyleneimine (FA-PEI) was grafted onto acid-treated uniform mesoporous carbon spheres through one-step electrostatic attraction. PTX was loaded into mesopores of nanoparticles through solvent evaporation, present as amorphous. The release of PTX from the FA-PEI-UMCS nanoparticles exhibited an initial rapid release, followed by a sustained release. And release rate could be regulated by changing amount of FA-PEI complex on the UMCS. The uptake of PTX-encapsulated nanoparticles was studied exploiting Caco-2 cells as an in vitro model. The results of confocal microscopy and flow cytometry demonstrated that folate functionalization enhanced internalization of nanoparticles by the cells. Moreover, PTX loaded in FA-PEI-UMCS nanoparticles resulted in a 5.37-fold increase in apparent permeability (Papp) across Caco-2 cell monolayers compared to Taxol(®). And the in vivo results showed that FA-PEI-UMCS nanoparticles did not only improve the oral bioavailability of PTX, but also decrease the gastrointestinal toxicity of PTX. In conclusion, the FA-PEI-UMCS nanoparticles might be a potentially applicable system to improve oral absorption of drugs with poor oral bioavailability.

Density functional theory (DFT) and natural bond orbital (NBO) study of vibrational spectra and intramolecular hydrogen bond interaction of L-ornithine-L-aspartate.

In this study, exhaustive conformations of (S)-4-amino-4-carboxybutan-1-aminium (S)-3-amino-3-carboxypropanoate (LOLA) have been scanned. Experimental and theoretical studies on the structure and vibrations of the title compound are presented. The optimized molecular structure, vibrational wavenumbers, Mulliken atomic charges, natural bond orbital (NBO) and molecular electrostatic potential studies have been performed by density functional theory (DFT) using B3LYP method with the 6-311++G(d,p) basis set. Computed X-ray powder diffraction (XRPD) data has been carried out by DFT calculations and ab initio from measured XRPD finding. The LOLA molecular geometry has been determined which exists in the form of salt by intramolecular H-bonds and ionic bonding. Moreover, calculated vibrational frequencies were applied to simulate IR and Raman spectra of the title compound which showed excellent agreement with observed spectra. Reliable vibrational assignments have been made on the basis of potential energy distribution (PED) and 0.992 has been obtained by least squares method which is the uniform scaled factor for theoretical frequencies at 6-311++G(d,p) basis set. In addition, the hydrogen bonding in LOLA molecule has been explored by calculation of the hyperconjugative charge transfer interaction on [LP X-σ(*)(Y-H)], under NBO analysis, Mulliken atomic charge analysis, molecular electrostatic potential map (MEP) and vibrational spectra. Finally, HOMO-LUMO of the title compound has been plotted for predicting reactive sites.

Biocompatibility Research of a Novel pH Sensitive Ion Exchange Resin Microsphere.

The main objective of this study was to investigate biocompatibility and provide in-vivo pharmacological and toxicological evidence for further investigation of the possibility of pH sensitive ion exchange resin microsphere for clinical utilizations. Acute toxicity study and general pharmacological studies were conducted on the pH sensitive ion exchange resin microsphere we prepared. The general pharmacological studies consist of the effects of the pH sensitive ion exchange resin microsphere on the nervous system of mice, the functional coordination of mice, the hypnosis of mice treated with nembutal at subliminal dose, the autonomic activities of tested mice, and the heart rate, blood pressure, ECG and breathing of the anesthetic cats. The LD50 of pH sensitive ion exchange resin microsphere after oral administration was more than 18.84 g·Kg(-1). Mice were orally administered with 16 mg·Kg(-1), 32 mg·Kg(-1) and 64 mg·Kg(-1) of pH sensitive ion exchange resin microsphere and there was no significant influence on mice nervous system, general behavior, function coordination, hypnotic effect treated with nembutal at subliminal dose and frequency of autonomic activities. Within the 90 min after 5 mg·Kg(-1), 10 mg·Kg(-1), 20 mg·Kg(-1) pH sensitive ion exchange resin microsphere was injected to cat duodenum, the heart rate, blood pressure, breathing and ECG of the cats didn't make significant changes in each experimental group compared with the control group. The desirable pharmacological and toxicological behaviors of the pH sensitive ion exchange resin microsphere exhibited that it has safe biocompatibility and is possible for clinical use.

The preparation of the sustained release metformin hydrochloride microcapsules by the Wurster fluidized bed.

The main objective of this study was to prepare sustained release metformin hydrochloride microcapsules by the Wurster fluidized bed and to obtain the optimized coating process and formulation. Fine microcapsules without agglomeration were obtained in a continuous coating process with the atomization air pressure of 0.2Mpa and an appropriate coating speed temperature. With other design variables of coating process fixed, the effects of different fluidizing air volume, coating temperature, coating speed, coating material, coating materials amount, plasticizer type and plasticizer amount on drug release were investigated respectively. Coating solution was achieved by dissolving EC45cps of 21 g, EC100cps of 7 g, DBS of 2.8 g and talcum powder of 8 g in ethanol to get a final volume of 500 ml. Particles of 150g along with 500mL coating solution would be fine. The results showed that with the air volume of 35 m3•h-1, coating temperature of 35o, coating speed of 6 mL•min-1 and proper amount of coating solution, fine microcapsules were obtained. The mean diameter of the microcapsules obtained eventually were 213 µm and the drug content were 23%, which was suitable for producing a suspension. Particle diameter distribution corresponded to the normal distribution and obviously prolonged drug-release was achieved.